 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 0.4mm Contact Pitch, 1.5mm above the board, Board-to-Board / Board-to-FPC Connectors DF18 Series Low profile - Board-to-board distance of 1.5 mm FPC Stiffener 1.5+0.2 -0.1 Board FPC Stiffener 1.5+0.2 -0.1 Board High Contact Reliability --- Effective connection wipe of 0.4 mm Features 1. Allows higher mounting density of board components Extremely small board mounting pattern and low above-theboard profile makes the connector suitable for small device applications. Male contact Plug 1.5mm above the board 2. High Contact Reliability Electrical connec tion wipe :0.4mm Despite it's small size and low profile the contacts have large deflection distance, guaranteeing reliable electrical performance. 3. Good Mating Characteristics Large lead-in distance of 0.33 mm in horizontal directions and tactile "click" confirms fully mated condition of connectors. Receptacle Female contact 4. Optional Additional Board Retention For applications requiring extra-strong hold of connectors to the board connectors can be ordered with optional metal holddown. 5. Automatic Board Placement Connectors have large flat width (Plug: 1.4 mm, Receptacle: 1.44mm) to accommodate pick-up with automatic placement machines. Self-alignment distance: 0.33 mm Applications Digital video cameras, Digital still cameras, cellular phones, miniature displays, cameras portable equipment and other applications requiring small reliable board-to-board and FPCto-Board connections. 2004.6 1 Product Specifications Current rating Rating Voltage rating 30V AC Item 1. Insulation resistance 2. Withstanding voltage 3. Contact resistance 4. Vibration 5. Humidity Operating humidity range Specification 50 M ohms min. No flashover or insulation breakdown. 60 m ohms max. No electrical discontinuity of 1 ms or more. Contact resistance: 60 m ohms max. Insulation resistance: 25 M ohms min. Contact resistance: 60 m ohms max. Insulation resistance: 50 M ohms min. Contact resistance: 60 m ohms max. No deformation of any component. No affect on contacts. 100 V DC 100 V AC / one minute 1 mA AC, 20mv max., 1KHz Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours / 3 axis. +o 96 hours at temperature of 40 - 2 C and humidity of 90 to 95% Temperature: -55 C--> +15 C to +35 C--> +85 C--> +15 C to +35 C Duration: 30 --> 2 to 3 --> 30 --> 2 to 3 (Minutes) 5 cycles 50 cycles Reflow: At the recommended temperature profile Manual soldering: 300 C for 3 seconds o o o o o o o 0.3A Operating temperature range -35 C to +85 C (Note 1) Storage temperature range 40 C to 80 C (Note 2) o o o o -10 C to +60 C (Note 2) 40 C to 70 C (Note 2) o o o o Storage humidity range Conditions 6. Temperature cycle 7. Durability (insertion/ withdrawal) 8. Resistance to soldering heat Note 1: Includes temperature rise caused by current flow. Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non-conducting condition of installed connectors in storage, shipment or during transportation. Materials Product Part Insulator Receptacles Plugs Contacts Metal fittings Copper alloy Brass Gold plated Tin plated Material LCP Finish Color: Black Remarks UL94V-0 --- Ordering Information Receptacles / Plugs 1 1 2 Series name: DF18 2 3 4 3 4 5 6 6 7 7 Terminal type V: SMT vertical mounting type Packaging type (51): Plug,embossed tape packaging (2,000 pieces per reel) (81): Receptacle,embossed tape packaging (2,000 pieces per reel) Number of Contacts: 20, 30, 40, 50, 60, 70, 80, 100, 120 Connector type DS: Double-row receptacle DP: Double-row plug Contact pitch 0.4 mm Hold-down bracket type B: With metal hold-down, (receptacles only) C: With added hold-down contacts D: With added hold-down contacts,increased Removal Force Type(receptacle only) E: With added hold-down contacts,increased Removal Force Type(receptacle only) 5 2 Receptacles (with metal hold-down) PCB mounting pattern Unit: mm Part Number DF18B - 20DS-0.4V (81) DF18B - 30DS-0.4V (81) DF18B - 40DS-0.4V (81) DF18B - 50DS-0.4V (81) DF18B - 60DS-0.4V (81) DF18B - 70DS-0.4V (81) DF18B - 80DS-0.4V (81) DF18B-100DS-0.4V (81) DF18B-120DS-0.4V (81) CL No. 684-0021-3-81 684-0022-6-81 684-0023-9-81 684-0005-7-81 684-0006-0-81 684-0024-1-81 Reserved for product expansion 684-0008-5-81 Reserved for product expansion Number of Contacts 20 30 40 50 60 70 80 100 120 A 7.20 9.20 11.20 13.20 15.20 17.20 19.20 23.20 27.20 B 5.62 7.62 9.62 11.62 13.62 15.62 17.62 21.62 25.62 C 4.18 6.18 8.18 10.18 12.18 14.18 16.18 20.18 24.18 D 3.60 5.60 7.60 9.60 11.60 13.60 15.60 19.60 23.60 Note: Embossed tape reel packaging(2,000 pieces/reel) Order by the number of reels. 3 Receptacles (without metal hold-down) Note: Please specify metal fittings when connecting rigid PCB's. PCB mounting pattern Unit: mm Part Number DF18C - 20DS-0.4V (81) DF18C - 30DS-0.4V (81) DF18C - 40DS-0.4V (81) DF18C - 50DS-0.4V (81) DF18C - 60DS-0.4V (81) DF18C - 70DS-0.4V (81) DF18C - 80DS-0.4V (81) DF18C-100DS-0.4V (81) DF18C-120DS-0.4V (81) CL No. 684-0017-6-81 684-0018-9-81 684-0019-1-81 684-0001-6-81 684-0002-9-81 684-0020-0-81 684-0003-1-81 684-0004-4-81 684-0013-5-81 Number of Contacts 20 30 40 50 60 70 80 100 120 A 3.60 5.60 7.60 9.60 11.60 13.60 15.60 19.60 23.60 Note: Embossed tape reel packaging (2,000 pieces/reel) Order by the number of reels. 4 Plugs (with metal hold-down terminals) A--0.05 0.58 0.15 +0.03 C 0.04 P=0.4 0.04 0.58 0.15 0.2 2.36 -- 0.1 +0.03 1.44--0.03 +0.1 B--0.03 +0.05 3.98 0.15 0.1 0.03 1.16 A 0.05 0.05 Note 1 Note 1 PCB mounting pattern 0.6 0.6 0.02 0.02 (C-1.6) 0.02 P=0.4 0.02 0.2 0.02 0.6 0.02 0.6 0.02 Note 1 Note 1 Added hold-down contacts Note 1: The terminals located at each of the 4 corners provide additional hold to the board's mounting surface and are not part of electrical connection. When counting the terminal leads the number of actual electrical circuits is lower by 4. Example: Connector with 24 terminal leads will have 20 actual electrical connections when mated with corresponding part. Note 2: Please note that mounting of parts within the area of the broken lines will prevent the connector from mating. D: When the corresponding connector is DF18B- DS-0.4V ( ) E: When the corresponding connector is DF18C- DS-0.4V ( ) 4.38+0.05 0 0 2.72 -0.05 6 D,E Plugs (with metal hold-down terminals, increased Removal Force) Part Number DF18D-20DP-0.4V (51) DF18D-30DP-0.4V (51) CL No. 684-0029-5-51 684-0030-4-51 Number of Contacts 20 30 A 5.56 7.56 B 4.24 6.24 C 4.40 6.40 D 7.20 9.20 E 6.60 8.60 Plugs (with metal hold-down terminals, increased Removal Force) Part Number DF18E-40DP-0.4V (51) DF18E-50DP-0.4V (51) CL No. 684-0031-7-51 684-0032-0-51 Number of Contacts 40 50 A 9.56 11.56 B 8.24 10.24 C 8.40 10.40 D 11.20 13.20 E 10.60 12.60 Plugs (with metal hold-down terminals) Part Number DF18C - 60DP-0.4V (51) DF18C - 70DP-0.4V (51) DF18C - 80DP-0.4V (51) DF18C-100DP-0.4V (51) DF18C-120DP-0.4V (51) CL No. 684-0010-7-51 684-0028-2-51 684-0011-0-51 684-0012-2-51 684-0014-8-51 Number of Contacts 60 70 80 100 120 A 13.56 15.56 17.56 21.56 25.56 B 12.24 14.24 16.24 20.24 24.24 C 12.40 14.40 16.40 20.40 24.40 D 15.20 17.20 19.20 23.20 27.20 E 14.60 16.60 18.60 22.60 26.60 t=0.15 0.02 5 Embossed Carrier Tape Dimensions Receptacles 1.5 +0.1 0 1.75 P=12 0.1 2 0.1 4 E 0.1 0.1 E E 0.1 (6) (4.2) 0.1 0.3 F F Unreeling direction E Reel dimensions Part number label 2 H G 0.5 0.3 0.1 1.55 0.15 J F F ( 80 ) 21 0.2 0. 8 13 K +2 0 (K+6)MAX Part Number DF18B - 20DS-0.4V DF18C - 20DS-0.4V DF18B - 30DS-0.4V DF18C - 30DS-0.4V DF18B - 40DS-0.4V DF18C - 40DS-0.4V DF18B - 50DS-0.4V DF18C - 50DS-0.4V DF18B - 60DS-0.4V DF18C - 60DS-0.4V DF18B - 70DS-0.4V DF18C - 70DS-0.4V DF18B - 80DS-0.4V DF18C - 80DS-0.4V DF18B-100DS-0.4V DF18C-100DS-0.4V DF18B-120DS-0.4V DF18C-120DS-0.4V G 16.0 24.0 16.0 24.0 24.0 24.0 32.0 24.0 32.0 44.0 44.0 H 28.4 28.4 40.4 40.4 J 7.5 11.5 7.5 11.5 11.5 11.5 14.2 11.5 14.2 20.2 20.2 K 16.4 24.4 16.4 24.4 24.4 24.4 32.4 24.4 32.4 44.4 44.4 Note: Bottom side feed holes are added to embossed tape when G = 32.0 or greater. 6 330 2 Plugs 1.5 +0.1 0 1.75 P=12 0.1 2 0.1 4 D 0.1 0.1 D D H 0.1 E G 0.1 F 0.3 E (4.18) E E Unreeling direction D Reel dimensions Part number label 2 0.5 ( 80 ) 21 0.2 0. 8 13 K +2 0 (K+6)MAX Part Number DF18D - 20DP-0.4V DF18D - 30DP-0.4V DF18E - 40DP-0.4V DF18E - 50DP-0.4V DF18C - 60DP-0.4V DF18C - 70DP-0.4V DF18C - 80DP-0.4V DF18C-100DP-0.4V DF18C-120DP-0.4V F 16.0 16.0 24.0 24.0 24.0 24.0 32.0 44.0 44.0 G 28.4 40.4 40.4 H 7.5 7.5 11.5 11.5 11.5 11.5 14.2 20.2 20.2 K 16.4 16.4 24.4 24.4 24.4 24.4 32.4 44.4 44.4 Note: Bottom side feed holes are added to embossed tape when F = 32.0 or greater. 330 2 0.3 0.1 1.35 0.15 7 Usage Recommendations 1. Recommended temperature profile Temperature 250 C 200 C 150 C 100 C Preheating 50 C 0C 0 sec. 50 sec. 100 sec. 150 sec. Time o o o o o o IR Re-flow Preheating: 150 C Soldering: 235 5 C o o o 30 to 90 sec. for 10 sec. Max. 220 C min. for 10 to 20 sec. 240 C max. o 220 C o Soldering Note 1: Up to 2 cycles of reflow soldering are possible under the same conditions, provided that there is a return to normal temperature between the first and second cycle. Note 2: The temperature profile indicates the board surface temperature at the point of contacts with the connector terminals (for surface mounted plug assembly). 2. Recommended soldering conditions 3. Recommended screen thickness and open area ratio (Pattern area ratio) 4. Board warping 5. Cleaning conditions 6. Precautions Soldering temperature: 290 Thickness: 0.12 mm Open area ratio: 70% Maximum of 0.03mm at the connector center section, with both ends of the connector as reference points. Refer to "Nylon Connector Use Handbook". Excessive twisting when mating/un-mating may cause damage to the connectors. Specify receptacles with the metal hold-down when connecting rigid (non- flexible) printed circuit boards. 10 C, soldering time: within 2 sec. o USA: HIROSE ELECTRIC U.S.A., INC. 2688 Westhills Court, Simi Valley, CA 93065-6235 Phone : 1 805 522 7958 Fax : 1 805 522 3217 http://www.hiroseusa.com UNITED KINGDOM: HIROSE ELECTRIC UK LTD. Crownhill Business Centre 22 Vincent Avenue Crownhill, Milton Keynes MK8 OAB Phone : 44 1908 305400 Fax : 44 1908 305401 http://www.hirose.co.uk HONG KONG: HIROSE ELECTRIC CO., LTD. Unit 506, Energy Plaza. 92 Granville Road, Tsim Sha Tsui East, Kowloon Phone : 852 2803 5338 Fax : 852 2591 6560 GERMANY: HIROSE ELECTRIC GmbH Zeppelinstrasse-42 D-73760 Ostfildern Kemnat Phone : 49 711 4560021 Fax : 49 711 4560729 http://www.hirose.de KOREA: HIROSE KOREA CO., LTD. (#2NA311,Shihwa Industrial Complex), 1261-10, Jeoungwhang-Dong, Shihung-City, Kyunggi-Do Phone : 886 2 2557 7351, 7352 Fax : 886 2 2552 9851 http://www.hirose.co.kr TAIWAN: HIROSE ELECTRIC TAIWAN CO., LTD. No.28 Lane 247 Sec. 2 Yen Ping N,Rd.Taipei Phone : 886 2 2557 7351, 7352 Fax : 886 2 2552 9851 THE NETHERLANDS: HIROSE ELECTRIC B.V. Beechavenue 46.1119PV Schiphol-Rijk Phone : 31 20 6557 460 Fax : 31 20 6557 469 http://www.hiroseeurope.com CHINA: HIROSE ELECTRIC TRADING(SHANGHAI) CO., LTD. 3705,Bund Center,222 Yan An Road(E), Shanghai 20002 Phone : 86 21 6335 2538 Fax : 86 21 6335 0767 SINGAPORE: HIROSE ELECTRIC CO., LTD. 10 Anson Road #34-13 International Plaza 079903 Phone : 65 6324 6113 Fax : 65 6324 6123 HIROSE ELECTRIC CO., LTD. 5-23,OSAKI 5-CHOME,SHINAGAWA-KU,TOKYO 141-8587,JAPAN PHONE: 81-3-3491-9741, FAX: 81-3-3493-2933 http://www.hirose.com http://www.hirose-connectors.com 8 The contents of this catalog are current as of date of publication. Contents are subject to change without notice for the purpose of product improvements. |
Price & Availability of DF18D-50DS-04V
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |